CUSTOM TOOL TABLES  (Make your own, or we'll do it for you)

Average hole counts are increasing while average hole diameters are decreasing. This coupled with increased layer counts and new laminate materials is making it even more important that the correct speed (RPM), in-feed, retract rate, and "max hits" be used for every hole on every panel.  System 7 gives you the ability to create and use up to 40 different Tool Tables. You can also specify which Tool Table to use for each drilling program, on each machine.

System 7 enables you to link tool tables to drilling programs. "Linking" means the particular tool table to be used can be selected and stored with the drilling program on your network file server. This eliminates the need for the machine operator to select a tool table and/or enter tool parameters on the keyboard of the machine.  This is particularly useful to our customers who build complex boards on exotic materials.

In the past tool tables were either kept on the machine controller or the computer connected to your drill and router.  System 7 allows you to move all your Tool Tables to your Drill Room File Server.  This simplifies the creation and maintenance of your Tables and can give your Engineering or CAM department exclusive control over the content of the Tool Tables used in production.  

 Tool Tables Available For Download

COPYRIGHT © CALIFORNIA SOFTWARE SYSTEMS 2003 - 2010

WWW.CALIFORNIASOFTWARESYSTEMS.COM     1791 San Juan Canyon Road      San Juan Bautista, CA. 95045       (831) 477-6843